Propane Gas Tiki Torches

Propane gas tiki torches from Beachside Lighting are the same torches used at all of Hawaii’s hotels and resorts. These CSA design-certified fixtures provide a 12″ – 15″ flame and can work off of a standard low-pressure propane gas line (11″ water column). For years these torches have added ambiance to hotels, restaurants, and residences throughout the state of Hawaii and all over the world.

  • The Tiki Torch Screen (TK-SCREEN) is a two-part screen attached to the torch’s gas distribution cap and is sold as a replacement or spare for existing gas torches. The outer portion of the screen is made of 16-gauge, type 304 perforated stainless steel. The inner portion is 22-gauge perforated stainless steel and acts as a diffuser to deliver a single, lazy flame. The life expectancy of the Tiki Torch Screen (TK-SCREEN) can vary greatly. Although it is stainless steel, heating ultimately weakens the corrosion resistance, making frequency of use a factor. Proximity to the ocean also is a variable in longevity. For example, the Tiki Torch Screen (TK-SCREEN) on a torch used nightly at an oceanfront restaurant might have a three-year lifespan. The Tiki Torch Screen (TK-SCREEN) on a torch at an inland residential location might last ten to fifteen years. The Tiki Torch Screen (TK-SCREEN) is secured to the torch by an 8-32 stainless steel machine screw (included).
  • The Traditional Tiki Torch Cap (TK-1-N-P-CAP) is a cap that prevents water from entering the torch from the top. Made from .043” thick copper, the 2” high cap has a bottom flare matching the contour of the torch cones, helping it to rest in place. While each copper gas torch head has (4) small holes drilled in the base to allow for drainage as standard, the Traditional Tiki Torch Cap (TK-1-N-P-CAP) prevents water from ever entering the torch head.
    • 18-Gauge Spun Copper (Seamless)
    • Solid Brass Fittings
    Beachside Lighting's traditional, cone-shaped, copper Hawaiian tiki torch is made of 18-gauge spun (seamless) copper. The CSA design-certified torch has all-brass internal fittings and a perforated stainless steel diffuser surrounding the burner. It has a 1" NPT female fitting at the bottom for mounting onto standard 1" pipe or type K copper tubing (not included). Beachside manufactures and sells the torch head only. Poles are not included. Why aren't the poles included? Not sure which Tiki Torch Type you need? Compare Here.
    Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
  • Pua (Flower) Tiki Torch

    $316.45$321.45
    • Stainless Steel
    • Brilliant 12" -15" Flame
    • Solid Brass Fittings
    A Hawaiian tiki torch with a decorative plumeria flower pattern cut into its stainless steel cylinder. This torch produces a brilliant 12" -15" flame. The bottom 1" female brass fitting hooks up to a standard 1" galvanized pipe (not included). Because the flame burns within the cylinder, the tiki torch should be installed completely vertically. It can be installed either by itself or in pairs with staggered heights. Beachside manufactures and sells the torch head only. Poles are not included. Why aren't the poles included?
    Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
  • Ohe (Bamboo) Tiki Torch

    $316.45$321.45
    • Stainless Steel
    • Brilliant 12" -15" Flame
    • Solid Brass Fittings
    A Hawaiian tiki torch with a decorative striped bamboo pattern cut into its stainless steel cylinder. This torch produces a brilliant 12" -15" flame. The bottom 1" female brass fitting hooks up to a standard 1" galvanized pipe (not included). Because the flame burns within the cylinder, the tiki torch should be installed completely vertically. It can be installed either by itself or in pairs with staggered heights. Beachside manufactures and sells the torch head only. Poles are not included. Why aren't the poles included?
    Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
  • Bird of Paradise Tiki Torch

    $316.45$321.45
    • Stainless Steel
    • Brilliant 12" -15" Flame
    A Hawaiian tiki torch with a decorative bird of paradise pattern cut into its stainless steel cylinder. This torch produces a brilliant 12" -15" flame. The bottom 1" female brass fitting hooks up to a standard 1" galvanized pipe (not included). Because the flame burns within the cylinder, the tiki torch should be installed completely vertically. It can be installed either by itself or in pairs with staggered heights. Beachside manufactures and sells the torch head only. Poles are not included. Why aren't the poles included?
    Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
Go to Top